Honda 2004 Odyssey, Service Manual

Page: 1024 / 2459

−
−
−
−
０６
＊０３
YES
NO
YES
NO
14-411
SHIFT LOCK SOLENOID
CONNECTOR
YEL
SHIFT LOCK SOLENOID
CONNECTOR
20. Turn the ignition switch ON (II).
21. Measure the voltage between shift lock solenoid
connector terminal No. 1 and body ground.
Go to step 22.
Check for blown No. 9 (10A) fuse in the driver’s
under-dash fuse/relay box. If the fuse is OK, repair
open or short in the wire between the No. 1
terminal of the shift lock solenoid connector and
the driver’s under-dash fuse/relay box.
22. Connect the battery positive terminal to shift lock
solenoid connector terminal No. 1, and connect the
battery negative terminal to the terminal No. 2.
NOTE: Do not connect the terminal No. 2 to the
battery positive terminal or you will damage the
diode inside the shift lock solenoid.
23. Check that the shift lock solenoid operates.
Check for a loose multiplex control unit
(driver’s) connector. If necessary, substitute a
known-good multiplex control unit (driver’s) and
recheck.
Replace the shift lock solenoid.
Wire side of female terminals
Terminal side of male terminals
Is ther e batter y voltage?
Does the shif t lock solenoid oper ate pr oper ly?
03/07/29 09:45:36 61S0X050_140_0414