Honda 2004 Odyssey, Service Manual

Page: 820 / 2459

− −
１１
１２
Ｓ０Ｘ４ＡＡ０Ｅ１０４１１２１０２０１ＭＡＡＴ１０
Standard: 0.03 0.11 mm (0.001 0.004 in.)
THRUST SHIM, 41 x 73 mm
No. Part Number Thickness
14-207
3rd/4th Clutch Clearance Inspection
A
B
C
D
F
C
A
B
C
E
F
1. Remove the O-rings from the mainshaft.
2. Assemble the 41 x 73 mm thrust shim (A), 3rd/4th
clutch assembly (B), and 4th gear collar (C) on the
mainshaft (D).
3. Hold the 4th gear collar (C) against the clutch
assembly (B), then measure the clearance between
the clutch guide (E) and the 4th gear collar with a
feeler gauge (F) in at least three places. Use the
average as the actual clearance.
4. If the clearance is out of standard, remove the
thrust shim and measure its thickness.
5. Select and install a new shim, then recheck.
1 90414-P7T-000 7.85 mm (0.309 in.)
2 90415-P7T-000 7.90 mm (0.311 in.)
3 90416-P7T-000 7.95 mm (0.313 in.)
4 90417-P7T-000 8.00 mm (0.315 in.)
5 90418-P7T-000 8.05 mm (0.317 in.)
6 90419-P7T-000 8.10 mm (0.319 in.)
6. After replacing the thrust shim, make sure the
clearance is within standard.
03/07/29 09:35:27 61S0X050_140_0210