Honda 2004 Odyssey, Service Manual

Page: 945 / 2459

−
−
−
−
−
−
−
０１
０２
＊０１
Ｓ０Ｘ４ＡＡ１Ｋ７７１０００９０７５８ＦＡＡＴ００
DTC P0758:
YES
NO
YES
NO
YES
NO
14-332
Automatic Transmission
DTC Troubleshooting (cont’d)
LG2 (BRN/YEL)
SH B (GRN/WHT)
LG1 (BRN/YEL)
PCM CONNECTORS
B (25P) D (16P)
LG2 (BRN/YEL)
SH B (GRN/WHT)
LG1 (BRN/YEL)
PCM CONNECTORS
B (25P) D (16P)
PCM CONNECTOR B (25P)
LG1 (BRN/YEL) LG2 (BRN/YEL)
Problem in Shift Solenoid Valve
A Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-247)
before you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect PCM connectors B (25P) and D (16P).
3. Turn the ignition switch ON (II).
4. Measure the voltage between PCM connector
terminals D2 and B20 or B22.
Repair short to power in the wire between
PCM connector terminal D2 and the shift solenoid
valve B.
Go to step 5.
5. Turn the ignition switch OFF.
6. Measure the resistance between PCM connector
terminals D2 and B20 or B22.
Go to step 11.
Go to step 7.
7. Check for continuity between PCM connector
terminals B20 and body ground, and between B22
and body ground.
Go to step 8.
Repair open in the wires between PCM
connector terminals B20, B22, and ground (G101),
or repair poor ground (G101).
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is the r esistance 12 25 ?
Is ther e continuity?
03/07/29 09:39:06 61S0X050_140_0335