Honda 2004 Odyssey, Service Manual

Page: 1271 / 2459

−
−
−
−
−
−
−
−
＊０２
０１
０２
０３
YES
NO
YES
NO
YES
NO
YES
NO
19-70
ABS Components
DTC Troubleshooting (cont’d)
MODULATOR UNIT CONNECTOR
SOLENOID
(BRN/BLK)
ABS CONTROL UNIT CONNECTOR A (22P)
FSR (YEL/GRN)
ABS CONTROL UNIT CONNECTOR A (22P)
FSR (YEL/GRN)
ABS FAIL-SAFE RELAY CONNECTOR
GND (BLK)
9. Measure the voltage between the modulator unit
connector terminal No. 10 and body ground.
Repair short to power in the wire between
the ABS fail-safe relay, modulator unit, and ABS
relay box.
Go to step 10.
10. Disconnect the ABS control unit connector A (22P).
11. Turn the ignition switch ON (II).
12. Measure the voltage between terminal No. 21 and
body ground.
Repair short to power in the wire between
the ABS control unit and the ABS fail-safe relay.
Go to step 13.
13. Check for continuity between the ABS control unit
connector terminal No. 21 and body ground.
Repair short to body ground in the wire
between the ABS control unit and the ABS fail-safe
relay.
Go to step 14.
14. Check for continuity between the ABS fail-safe
relay connector terminal No. 3 and body ground.
Go to step 15.
Check for an open in the wire between the
ABS fail-safe relay and body ground. If the wire is
OK, check for poor ground at G201.
Terminal side of female terminals
Wire side of female terminals
Wire side of female terminals
Terminal side of female terminals
Is ther e batter y voltage?
Is ther e batter y voltage?
Is ther e continuity?
Is ther e continuity?
03/07/29 09:55:54 61S0X050_190_0070