Honda 2004 Odyssey, Service Manual

Page: 1385 / 2459

０１
０２
＊０１
20-20
Doors
Power Sliding Door Motor Unit Replacement (cont’d)
Fastener Locations
: Bolt, 4
6 x 1.0 mm
8 N·m
(0.8 kgf·m,
6 lbf ft)
A
Fastener Locations
: Nut, 3
6 x 1.0 mm
8 N·m
(0.8 kgf·m,
6 lbf·ft)
B
Fastener Locations
: Bolt, 2 : Bolt, 2 A B
C : Bolt, 2
6 x 1.0 mm
8 N·m
(0.8 kgf·m,
6 lbf·ft)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
6 x 1.0 mm
8 N·m
(0.8 kgf·m,
6 lbf·ft)
H
A
I D
F
I
G
E
B
C
C
B
A
8. Remove the bolts securing the front pulley (A).
9. Remove the nuts securing the rear pulley (B).
10. Remove the bolts (A), loosen the bolts (B, C) and
move the bracket (D) upward. Disconnect the motor
unit connectors (E) and control unit connectors (F).
On the left door, disconnect the buzzer connector
(G). Remove the motor unit (H) through the body
opening. Take care not to kink the power sliding
door motor unit cable (I).
03/07/29 10:00:09 61S0X050_200_0022