Honda 2004 Odyssey, Service Manual

Page: 597 / 2459

−
−
−
−
−
−
０３
０４
＊０１
０４
YES
NO
EVAP Bypass Solenoid Valve Test
YES
NO
YES
NO
11-288
EVAP System
DTC Troubleshooting (cont’d)
EVAP CANISTER PURGE
VALVE 2P CONNECTOR
IG1 (BLK/YEL)
A
A973X-041-
XXXXX
EVAP BYPASS SOLENOID
VALVE 2P CONNECTOR
2WBS (BLU)
A
B
8. Turn the ignition switch ON (II).
9. Measure voltage between EVAP canister purge
valve 2P connector terminal No. 2 and body ground.
Replace the EVAP canister purge valve.
Repair open in the wire between the EVAP
canister purge valve and No. 6 ECU (PCM) CRUISE
CONTROL (15A) fuse.
10. Disconnect the vacuum hose from the EVAP two
way valve (A), and connect a vacuum pump to the
hose.
11. Turn the ignition switch ON (II).
12. Apply vacuum to the hose.
The EVAP bypass solenoid valve/EVAP two
way valve is OK. Go to step 18.
Go to step 13.
13. Turn the ignition switch OFF.
14. Disconnect the EVAP bypass solenoid valve 2P
connector.
15. Check for continuity between EVAP bypass
solenoid valve 2P connector terminal No. 2 and
body ground.
Go to step 16.
Replace the EVAP bypass solenoid valve (A)
and O-rings (B).
Wire side of female terminals
Wire side of female terminals
Is ther e batter y voltage?
Does the valve hold vacuum?
Is ther e continuity?
03/07/29 09:26:21 61S0X050_110_0288