Honda 2004 Odyssey, Service Manual

Page: 2140 / 2459

−
−
−
−
０３
０３
０５
YES
NO
YES
NO
23-75
A
B
A
SRS MAIN HARNESS 18P CONNECTOR
14. Read the DTC.
Go to step 15.
Short to ground in the cable reel; replace the
cable reel (see page 23-376).
15. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
16. Disconnect the front passenger’s airbag 2P
connector (A) and both seat belt tensioner 2P
connectors (B).
17. Disconnect the SRS main harness 18P connector
(A) from the SRS unit.
18. Check resistance between the No. 1 terminal of the
SRS main harness 18P connector and body ground,
and between the No. 13 terminal and body ground.
There should be an open circuit, or at least 1 M
.
Faulty SRS unit; replace the SRS unit (see
page 23-382).
Short to ground in the SRS main harness;
replace the SRS main harness.
Wire side of female terminals
Is DT C 1-5 indicated?
Is the r esistance as specif ied?
03/07/29 10:33:00 61S0X050_230_0075