Honda 2004 Odyssey, Service Manual

Page: 736 / 2459

−
−
−
−
−
−
−
−
＊０１
０１
０２
Ｓ０Ｘ４ＡＡ３Ｋ７７１０００９１７７３ＦＡＡＴ００
2001 Model
DTC P1773:
YES
NO
YES
NO
YES
NO
14-123
A/T CLUTCH PRESSURE CONTROL
SOLENOID VALVE B CONNECTOR
PCM CONNECTORS
LS BP (ORN) LS BM (GRN)
B (24P) C (22P)
PCM CONNECTORS
LS BP (ORN) LS BM (GRN)
B (24P) C (22P)
Problem in A/T Clutch Pressure
Control Solenoid Valve B Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Disconnect the AT clutch pressure control solenoid
valve B connector (2P).
2. Measure the A/T clutch pressure control solenoid
resistance at the solenoid valve connector.
Go to step 3.
Replace the A/T clutch pressure control
solenoid valves A and B (see page 14-133).
3. Disconnect PCM connectors B (24P) and C (22P).
4. Check for continuity between PCM connector
terminal B16 and body ground, and between
terminal C8 and body ground.
Repair short to ground in the wires between
PCM connector terminals B16 and C8, and the A/T
clutch pressure control solenoid valve B.
Go to step 5.
5. Connect the A/T clutch pressure control solenoid
valve B connector.
6. Measure the resistance between PCM connector
terminals B16 and C8.
Go to step 7.
Repair loose terminal or open in the wires
between PCM connector terminals B16 and C8, and
the A/T clutch pressure control solenoid valve B.
(cont’d)
Terminal side of male terminals
Wire side of female terminals
Wire side of female terminals
Is ther e 3 10 ?
Is ther e continuity?
Is ther e 3 10 ?
03/07/29 09:32:33 61S0X050_140_0126