REPLACEMENT
MANUAL
OF
FRONT HEADLIGHT LENS COVERS
PA INSTALLERS (MAP)
HELPLINE (WHATSAPP / MAIL)
DIY YOUTUBE VIDEO
+420 608 411 090
[email protected]
Page 1: ...REPLACEMENT MANUAL OF FRONT HEADLIGHT LENS COVERS PARTNERS INSTALLERS MAP HELPLINE WHATSAPP MAIL DIY YOUTUBE VIDEO 420 608 411 090 shop bimmerjakes com ...
Page 2: ...r first step use a wet napkin There is the risk that the running water would flowed inside the light Removing the screws and buckles The process continues with removing the screws buckles and possible nail buckle wich hold the cover and back corpus together Removing the old cover Manufacturers are using 2 types of sealant to mount the cover Removal by heating The first type of sealant is possible ...
Page 3: ...mical agents is not detrimental to health The gripping grove has to be cleaned carefully so it fits to the bottom properly same like the origi nal one This is the most difficult part of the process 6 Removing grease Following step is to degrease clean gripping grove by using al cohol cleaner Alcohol cleaner unlike others aggressive clean ers will not damage the plastic parts 7 Cleaning the new cov...
Page 4: ...ient amount of sealant could cause insufficient ability to seal and decrease ability to be water resistant You must press the cover fully to the groove and make sure that the cover is surrounded by sealant sufficiently 10 Fixation The final step of the process is to fix the headlight to avoid undesirable movement of the cover during solidification The best way how to fix the headlight is by using ...
