Honda 2004 Odyssey, Service Manual

Page: 1392 / 2459

０４
＊０１
20-27
D
C
B
A
Lower
Center
C
B
A
D
7. Hold the bottom of the door (A) away from the
body, and gently slide it forward until the upper
roller (B) lines up with the notch (C) in the upper rail
(D). While holding the door, remove the upper
roller from the upper rail through the notch.
8. Remove the sliding door. Take care not to drop the
door.
9. Install the door in the reverse order of removal, and
note these items:
• Clean the groove portion of each rail, and apply
multipurpose grease to the lower roller (A)
moving portion of the lower roller plate (B) and
stop spring (C). If equipped with the power
sliding door, apply multipurpose grease to the
corner portion of the center rail (D), as shown.
• Apply multipurpose grease evenly along the
entire length of the lower roller plate (B).
• Make sure the door opens properly and locks
securely.
• Check the door alignment, and if necessary,
adjust it (see page 20-28).
• Check for water leaks (see step 7 on page 20-23).
03/07/29 10:00:14 61S0X050_200_0029