Honda 2004 Odyssey, Service Manual

Page: 2414 / 2459

−
−
−
−
−
−
−
０１
＊０３
＊０４
Ｓ０Ｘ４ＡＺ３Ｈ４６４０００５６６０２ＦＡＡＴ００
’02 Model
SRS indicator doesn’t come on
YES
NO
YES
NO
YES
NO
23-349
B
C
GAUGE ASSEMBLY CONNECTOR B (22P)
BLK
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
1. Turn the ignition switch ON (II), and see if the other
indicators come on (brake system, etc.).
Go to step 2.
Go to step 8.
2. Turn the ignition switch OFF, then remove the
gauge assembly (see page 22-100). Disconnect
gauge assembly connector B (22P), and C (16P)
3. Check resistance between the No. 16 terminal of
gauge assembly connector B (22P) and body
ground. There should be 0
1.0 .
Go to step 4.
Open in the BLK wire of the dashboard wire
harness or faulty body ground terminal (G503). If
the body ground terminal is OK, replace the
dashboard wire harness.
4. Check for voltage between the No. 9 terminal of
gauge assembly connector C (16P) and body
ground within the first 6 seconds after turning the
ignition switch ON (II). There should be 8.5 V or less.
Faulty SRS indicator circuit in the gauge
assembly; replace the gauge assembly.
Go to step 5.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Do the other indicator s come on?
Is the r esistance as specif ied?
Is the voltage as specif ied?
03/07/29 10:41:31 61S0X050_230_0349
from the gauge assembly.