Honda 2004 Odyssey, Service Manual

Page: 185 / 2459

＊０４
＊０１
＊０３
＊０２
Ｓ０Ｘ４Ａ００Ａ１４６７３２１７５３１ＫＤＡＴ００
○
●
Special Tools Required
Removal
Installation
6-18
Cylinder Head
Crankshaft Pulley Removal and Installation
A
07JAB-001020A
B
07MAB-PY3010A
C
07JAA-001020A
A
07JAB-001020A
B
07MAB-PY3010A
C
07JAA-001020A
: Clean
A
A
B
A
D
C
• Holder handle 07JAB-001020A
• Holder attachment, 50 mm, offset 07MAB-PY3010A
• Socket, 19 mm 07JAA-001020A
or a commercially available 19 mm socket
1. Remove the right front tire/wheel.
2. Remove the splash shield.
3. Hold the pulley with holder handle (A) and holder
attachment (B).
4. Remove the bolt with a heavy duty 19 mm socket
(C) and breaker bar.
1. Clean the pulleys (A), crankshaft (B), bolt (C) and
2.
245 N·m (25.0 kgf·m, 181 lbf·ft). Do not use an
impact wrench.
–1 Hold the pulley with holder handle (A) and
holder attachment (B).
–2 Tighten the bolt with a torque wrench and
19 mm socket (C).
3. Install the splash shield.
4. Install the right front tire/wheel.
(or commercially available)
(or commercially available)
03/07/29 09:10:42 61S0X050_060_0018
washer (D). Lubricate with new engine oil as shown.
Install the crankshaft pulley, and tighten the bolt to
: Lubricate with new engine oil