Honda 2004 Odyssey, Service Manual

Page: 1963 / 2459

０１
０２
１１
Ｓ０Ｘ４Ａ００Ｊ４６６６０５２１０２１ＦＥＡＴ３０
Tailgate (With Security System)
22-284 22-284
Power Door Locks/Factory Keyless/Factory Security
Door/Tailgate Key Cylinder Switch
Test (cont’d) Door Lock Switch Test
B
A
A
B
Terminal
Position
OFF
1 2
UNLOCK
3
LOCK
1. Remove the tailgate trim panel (see page 20-61).
2. Disconnect the 3P connector (A) from the switch (B).
3. Check for continuity between the terminal in each
switch position according to the table.
4. If the continuity is not as specified, replace the
switch.
1. Remove the inner door handle (see page 20-7).
2. Remove the two screws (A), then remove the door
lock switch (B).
3. Check for continuity between the No. 1 and No. 2
terminals in each switch position.
• There should be no continuity with the door lock
switch in neutral or LOCK.
• There should be continuity with the door lock
switch in UNLOCK.
4. Check for continuity between the No. 2 and No. 3
terminals in each switch position.
• There should be continuity with the door lock
switch in UNLOCK.
• There should be no continuity with the door lock
switch in neutral or LOCK.
5. If the continuity is not as specified, replace the
switch.
03/07/29 10:25:59 61S0X050_220_0286