Honda 2004 Odyssey, Service Manual

Page: 1355 / 2459

−
−
−
−
−
−
−
−
−
−
０３
０４
０５
０６
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
19-154
ABS/TCS Components
ABS Indicator Circuit Troubleshooting (cont’d)
ABS/TCS CONTROL CONNECTOR A (26P)
JUMPER
WIRE
GND1 (BLK)
ABS/TCS CONTROL CONNECTOR A (26P)
IG2 (YEL/BLK)
ABS/TCS CONTROL CONNECTOR A (26P)
JUMPER WIRE
ABS (BLU/WHT)
GAUGE ASSEMBLY CONNECTOR C (16P)
JUMPER WIRE ABS (BLU/WHT)
13. Check the R/C MIRROR (7.5A) fuse in the driver’s
under-dash fuse/relay box, and reinstall the fuse if
it is OK.
Go to step 14.
Replace the fuse, and recheck.
14. Connect the ABS/TCS control unit connector
A (26P) terminal No. 1 to body ground with a
jumper wire.
15. Turn the ignition switch ON (II).
Repair open in the wire between the ABS/
TCS control unit and body ground (G303).
Go to step 16.
16. Measure the voltage between the ABS/TCS control
unit connector A (26P) terminal No. 13 and body
ground.
Go to step 17.
Repair open in the wire between the R/C
MIRROR (7.5A) fuse and the ABS/TCS control
unit.
17. Connect the ABS/TCS control unit connector
A (26P) terminal No. 4 to body ground with a
jumper wire.
Check for loose ABS/TCS control unit
connectors. If necessary, substitute a known-good
ABS/TCS control unit, and recheck.
Go to step 18.
18. Connect the gauge assembly connector C (16P)
terminal No. 10 to body ground with a jumper wire.
Repair open in the wire between the gauge
assembly and the ABS/TCS control unit.
Replace the printed circuit board in the gauge
assembly.
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is the f use OK ?
Does the ABS indicator go of f ?
Is ther e batter y voltage?
Does the ABS indicator go of f ?
Does the ABS indicator go of f ?
03/07/29 09:58:22 61S0X050_190_0154