Honda 2004 Odyssey, Service Manual

Page: 2069 / 2459

０１
＊０１
＊０２
Ｓ０Ｘ４Ａ００Ｈ４６２０００５３４０１ＫＢＡＴ００
Front Seat Belt
23-4
Seat Belts
Front Seat Belt Replacement
A
B
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
A
A
10 x 1.25 mm
47 N·m (4.8 kgf·m, 35 lbf·ft)
B
C
D
SRS components are located in this area. Review the
SRS component locations, ’99-01 models (see page 23-
18), ’02 model (see page 23-19), ’03-04 models (see
page 23-20), and the precautions and procedures (see
page 23-21) before preforming repairs or service.
NOTE: Check the front seat belts for damage, and
replace them if necessary.
1. Make sure you have the anti-theft code for the radio
and the navigation system, and then write down
the frequencies for the preset buttons.
2. Slide the front seat forward fully.
3. Disconnect the negative cable from the battery, and
wait at least 3 minutes before beginning work.
4. Remove the upper anchor cover (A).
5. For ’99-02 models driver’s and passenger’s seat
belts and ’03-04 models driver’s seat belt: Pull the
lower anchor cover (A) back, and remove the lower
anchor bolt (B).
6. For ’03-04 models passenger’s seat belt: Remove
the rear riser cover (see step 7 on page 20-82).
Remove the bolt (A), and release the hook (B), then
remove the lower anchor bracket (C) from the outer
weight sensor (D).
03/07/29 10:30:33 61S0X050_230_0004