Honda 2004 Odyssey, Service Manual

Page: 1270 / 2459

−
−
−
−
−
−
−
−
−
−
０１
０２
＊０１
Ｓ０Ｘ４Ａ０７Ｋ７０１０００８１５４０ＦＡＡＴ００
＋
＋
DTC 54:
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
19-69
ABS FAIL-SAFE RELAY CONNECTOR
B (WHT/GRN)
ABS FAIL-SAFE RELAY CONNECTOR
B (WHT/GRN)
SOLENOID
(BRN/BLK)
JUMPER WIRE
MODULATOR UNIT CONNECTOR
SOLENOID
(BRN/BLK)
ABS Fail-safe Relay
1. Check the ABS F/S (20A) fuse in the under-hood
fuse/relay box, and reinstall the fuse if it is OK.
Go to step 2.
Replace the fuse, and recheck.
2. Reinstall the fuse, and turn the ignition switch ON
(II).
Repair short to body ground in the wire
between the ABS fail-safe relay, pump motor relay,
and modulator unit.
Go to step 3.
3. Check the ABS fail-safe relay in the multi-relay box
(see page 22-88). The wire colors of the ABS fail-
safe relay connector are WHT/GRN, BRN/BLK, BLK,
and YEL/GRN.
Leave the ABS fail-safe relay removed, and
go to step 4.
Replace the ABS fail-safe relay.
4. Measure the voltage between the ABS fail-safe
relay connector terminal No. 1 and body ground.
Go to step 5.
Repair open in the wire between the under-
hood fuse/relay box and the ABS fail-safe relay.
5. Connect the ABS fail-safe relay connector terminal
No. 1 to No. 2 with a jumper wire.
6. Disconnect the modulator unit connector.
7. Measure the voltage between terminal No. 10 and
body ground.
Go to step 8.
Repair open in the wire between the ABS fail-
safe relay and the modulator unit.
8. Remove the jumper wire from the ABS fail-safe
relay connector.
(cont’d)
Terminal side of female terminals
Terminal side of female terminals
Terminal side of female terminals
Is the f use OK ?
Does the f use blow?
Is the r elay OK ?
Is ther e batter y voltage?
Is ther e batter y voltage?
03/07/29 09:55:53 61S0X050_190_0069