Honda 2004 Odyssey, Service Manual

Page: 1512 / 2459

０１
Ｓ０Ｘ４Ａ００Ｊ１８５７３４２１２０１ＫＢＡＴ００
Adhesive tape: 3M 5311, or equivalent
Thickness 1.2 mm (0.047 in.) Width 5 mm (0.2 in.)
20-147
Door Molding Replacement
Fastener Locations
: Clip, 13
A
B
C
NOTE:
• Wrap the blade of your putty knife or flat-tip screwdriver with protective tape to prevent damage to the door.
• Be careful not to pry too far or you may bend the molding.
• Put on gloves to protect your hands.
1. Prepare to release the molding clips from inside the vehicle.
• To remove the front door molding, remove the front door panel and plastic cover (see page 20-7).
• To remove the sliding door molding, remove the sliding door panel and plastic cover (see page 20-13).
2. Release the clips, and gently pry the front door molding (A) or sliding door molding (B) away from the door while
removing the adhesive tape (C).
3. Install the moldings in the reverse order of removal, and note these items:
• Replace any damaged clips and adhesive tape.
• Push the clips and adhesive tape into place securely.
03/07/29 10:03:41 61S0X050_200_0149