Honda 2004 Odyssey, Service Manual

Page: 1278 / 2459

− −
− −
１１
Ｓ０Ｘ４Ａ０７Ｄ１０６０００１２３０１ＫＢＡＴ１０
１１
１２
Ｓ０Ｘ４Ａ０７Ｄ１０６０００６５３０１ＭＡＡＴ１０
−
−
−
−
Standard:
Front: 0.5 1.0 mm (0.02 0.04 in.)
Rear: 0.2 1.1 mm (0.01 0.04 in.)
Front
Rear
19-77 19-77
ABS Control Unit Replacement Wheel Sensor Inspection
B
A
0.5 1.0 mm
(0.02 0.04 in.)
0.2 1.1 mm
(0.01 0.04 in.)
1. Remove the ABS control unit (A) on the driver’s
side under the dash.
2. Disconnect the ABS control unit connectors (B).
3. Install the ABS control unit in the reverse order of
removal.
1. Inspect the front and rear pulsers for chipped or
damaged teeth.
2. Measure the air gap between the wheel sensor and
pulser all the way around while rotating the pulser.
Remove the rear brake disc to measure the gap on
the rear wheel sensor. If the gap exceeds 1.0 mm
(0.04 in.), check for a bent suspension arm.
03/07/29 09:55:57 61S0X050_190_0077