Sharp MX-2610N User Manual Download Page 972

Page: 972 / 1312

OPERATION GUIDE - USER AUTHENTICATION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-013-01.htm[24/03/2011 3:03:34 PM]

MX-2610N / MX-3110N / MX-3610N

USER AUTHENTICATION

SETTING MODE

This setting enables or disables user authentication and specifies the authentication method.

When the user authentication is enabled, each user of the machine is registered. When a user

logs in, the separate authentication settings apply to the user. This function allows greater

control of security and cost management than that on previous machines.

Even if user information is not stored on the machine, you can directly enter the user

information stored in an LDAP server to log in the machine if necessary. In this case, the

authentication information of the "User" being stored as factory default applies to the login

user. For more information, see "Users stored as factory default".

For the procedure for storing users, see "USER LIST".

For details on login procedures when user authentication is enabled, see "User

authentication" of the OPERATIONS COMMON TO ALL MODES."

User Authentication

When [User Authentication] is enabled, the authentication screen appears before an operation

is carried out in any mode except the job status screen

After logging in, you can move freely through the modes.

The login screen appears when a document filing file is used or when a broadcast transmission is

reattempted from the job status screen.

Authentication Method Setting

This selects the authentication method. When using user authentication, be sure to configure

this setting first. The items to be configured for users stored after setting the user

authentication method vary depending on the selected authentication method.

Authenticate a User by Login Name and Password

Standard authentication method using a login name and password.

Authenticate a User by Login Name, Password and E-mail

Address

This authentication also checks the e-mail address, in addition to the login name and

password of the user.

Authenticate a User by User Number Only

Use this option for simple authentication if you skip the network authentication.

The login screen will vary depending on the authentication method that is

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 972 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: