Sharp MX-2610N User Manual Download Page 70

Page: 70 / 1312

OPERATION GUIDE - APPLICATION COMMUNICATION MODULE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-042b.htm[24/03/2011 2:56:29 PM]

MX-2610N / MX-3110N / MX-3610N

APPLICATION COMMUNICATION MODULE

Index

Contents

Overview

OPERATIONS COMMON TO ALL MODES

steps in all >

Tap the [Sharp OSA] key on the Home screen.

If no standard applications have been stored, the key cannot be tapped.

Select a standard application.

If two or more standard applications have been stored, the screen for selecting a standard

application will appear. Tap the standard application that you wish to use.

If only one standard application has been stored, connection to the standard application will

begin.

Connect the machine to the standard application.

The message "Connecting to the external application." appears while the machine

communicates with the standard application.

The mode select key cannot be tapped during scanning.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 70 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: