Sharp MX-2610N User Manual Download Page 879

Page: 879 / 1312

OPERATION GUIDE - FILE PRINTING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-021a.htm[24/03/2011 3:02:55 PM]

MX-2610N / MX-3110N / MX-3610N

FILE PRINTING

Index

Contents

Operation

DOCUMENT FILING

A file stored using document filing can be retrieved and printed when needed. The settings

used when the file was stored are also stored, and thus the file can be printed again using

those settings. The file can also be modified before printing by changing the print settings.

A file saved in black and white or greyscale cannot be printed in colour.

Printing is not available when a long-size document is saved in "Scan to HDD",

"Scan to External Memory Device", "E-mail", "FTP/Desktop", or "Network Folder".

Printing is available when the data saved in "E-mail", "FTP/Desktop", or "Network

Folder" includes a "Fax" or "Internet Fax" broadcasting address.

If print settings are changed when a stored file is printed, the only changed

setting that can be stored is the number of prints.

The printing speed may be somewhat slow depending on the resolution and

exposure mode settings of the stored file.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 879 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: