Sharp MX-2610N User Manual Download Page 880

Page: 880 / 1312

OPERATION GUIDE - FILE PRINTING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-021b.htm[24/03/2011 3:02:56 PM]

MX-2610N / MX-3110N / MX-3610N

FILE PRINTING

Index

Contents

Overview

DOCUMENT FILING

Prints a file with the various settings used

when it was saved. Select a file and tap the

[Print Now] key.

To print the file in black and white, select the

[Print B/W] checkbox

Quick printing

Changing settings before printing

Quick printing

Changing settings before printing

After selecting the desired file, follow the steps below.

SELECTING A FILE TO RETRIEVE

< 4 steps in all >

Tap the [Change Setting to Print] key.

Change the print settings.

For more information, see "OVERVIEW".

Select the [Delete] or [Print B/W] checkbox when needed.

Tap the [Start] key.

The file will be printed.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 880 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: