Sharp MX-2610N User Manual Download Page 347

Page: 347 / 1312

OPERATION GUIDE - REDUCING THE IMAGE QUALITY FOR TONER SAVING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-077.htm[24/03/2011 2:58:24 PM]

MX-2610N / MX-3110N / MX-3610N

REDUCING THE IMAGE QUALITY FOR

TONER SAVING

Toner save

Index

Contents

COPYING

steps in all >

This function minimizes toner consumption when making copies such as in-house resources,

which are not affected even if the image quality is reduced slightly. The toner saving level can

be selected from up to three levels.

Tap the [Others>>] key, and tap the [Toner Save Mode] key.

Select the toner saving level.

After the settings are completed, tap

and [<<Back] keys in sequence.

If user authentication is enabled, you can permit each user group to use the toner

save mode.

AUTHORITY GROUP LIST

To change the toner save mode setting:

In "Setting mode", select [System Settings] → [Energy Save] → [Toner Save Mode].

This function is not available in United Kingdom.

Toner Save Mode is not available when it is disabled in "Setting mode".

The toner save is cancelled for pattern printing.

PADDING UNAUTHORISED COPY PREVENTION DATA

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 347 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: