Sharp MX-2610N User Manual Download Page 844

Page: 844 / 1312

OPERATION GUIDE - METADATA DELIVERY (DATA ENTRY)

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-088.htm[24/03/2011 3:02:36 PM]

MX-2610N / MX-3110N / MX-3610N

METADATA DELIVERY (DATA ENTRY)

Index

Contents

IMAGE SEND

When the application integration module kit

is installed, metadata (data indicating the

attributes of the image file and how it is to be

processed) is generated based on pre-stored

information and transmitted separately from

an image file that is generated for sending a

scanned image. The metadata file is created

in XML format.

By linking the metadata with applications

such as document management software,

a workflow application, or an encryption

server, a sophisticated document solution

environment can be built.

Using the application integration module kit,

information on a generated image file can be

entered at the touch panel and transmitted

along with the image as an XML file.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 844 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: