Sharp MX-2610N User Manual Download Page 253

Page: 253 / 1312

OPERATION GUIDE - COPYING A PAMPHLET

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-035b.htm[24/03/2011 2:57:45 PM]

MX-2610N / MX-3110N / MX-3610N

COPYING A PAMPHLET

Book copy

COPYING

steps in all >

Place the original on the

document glass.

Place the opened pages of the "front and

last sheets".

DOCUMENT GLASS

Select a binding position.

When not inserting a cover, tap the

and [<<Back] keys in sequence. Then,

go to step 5.

To cancel book copy:

Tap the [Off] key.

When inserting a cover, tap

the [Cover Setting] key,
and tap the [On] key.

To make a copy on the inserted cover

sheet, check the [Make Copy on Cover

(Duplex)] box so that

appears.

Tap the [Others>>] key, and tap the [Book Copy] key.

To change the cover input tray:

Tap the [Paper Tray] key to display the tray selection screen. Tap the cover input

tray on the tray selection screen. For more information, see "SELECTING THE

PAPER TRAY FOR COPYING".

If the cover will be copied on, label sheets, transparency film, and tab paper

cannot be used.

This setting is not available when the covers/inserts function is disabled in the

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 253 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: