Sharp MX-2610N User Manual Download Page 762

Page: 762 / 1312

OPERATION GUIDE - CHANGING COLOR MODE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-046a.htm[24/03/2011 3:01:55 PM]

MX-2610N / MX-3110N / MX-3610N

CHANGING COLOUR MODE

Index

Contents

Operation

IMAGE SEND

Change the colour mode used to scan the original.

Mode

Scanning method

Auto

The machine detects whether the original is colour or black and white and

automatically selects full colour or black and white (Mono2 or Greyscale)

scanning.

Full Colour

The original is scanned in full colour. This mode is best for full colour

originals such as catalogues.

Mono2

Colours in the original are scanned as black or white. This mode is best for

text-only originals.

Greyscale

The colours in the original are scanned in black and white as shades of grey

(greyscale).

This function cannot be used in Internet fax mode.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 762 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: