Sharp MX-2610N User Manual Download Page 262

Page: 262 / 1312

OPERATION GUIDE - PRINTING DATES, PAGE NUMBERS, AND WATERMARKS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-038a.htm[24/03/2011 2:57:49 PM]

MX-2610N / MX-3110N / MX-3610N

PRINTING DATES, PAGE NUMBERS, AND

WATERMARKS

Stamp

COPYING

This function prints information such as the

date or stamp, which is not shown on the

original, on copies. You can print the

following five types of information.

Date

Page number

Stamp

Text

Watermark

For the stamp or watermark, you can print

text such as "CONFIDENTIAL" or

"PRIORITY". You can print pre-set text or

any characters as the text.

Each of the items above can be printed on

the header or footer of each sheet.

If the selected stamp content of one position overlaps the stamp content of

another position, priority will be given in the following order: watermark, right

side, left side, centre. Content that is hidden due to overlapping will not be

printed.

Text will be printed at the preset size regardless of the copy ratio or paper size

setting.

Text will be printed at the preset exposure regardless of the exposure setting.

Depending on the size of the paper, some printed content may be cut off or

shifted out of position.

When [Stamp] is combined with other functions:

Combined
function name

Resulting copies

Margin Shift

Together with the image, the stamp content is shifted the amount of the

margin width.

Tab Copy

Centring

Unlike a copy image that moves, the image will be printed in the position

set in the stamp.

Dual Page Copy

Card Shot

Stamp items are printed for each copy sheet.

2in1

Stamp items are printed for each original page.

Pamphlet Copy

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 262 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: