Home
/
Sharp
/
MX-2610N
/
User Manual

Sharp MX-2610N, User Manual, Page: 867 / 1312

Share

Page: 867 / 1312

Sharp MX-2610N User Manual Download Page 867

OPERATION GUIDE - QUICK FILE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-013a.htm[24/03/2011 3:02:50 PM]

MX-2610N / MX-3110N / MX-3610N

QUICK FILE

DOCUMENT FILING

This function allows you to store an original in copy mode or image send mode as an image

file in the Quick File folder of the machine.

The image file stored in quick file mode can be retrieved at a later time, allowing you to copy

the document or transmit it in image send mode without having to locate the original.

When a file is stored using Quick File, the following user name and file name are

automatically assigned to the file.

User Name: User Unknown

File Name: Mode_Day-Month-Year_Hour-Minute-Second

(Example: Copy_20110404_112030)

Stored to: Quick File Folder

When user authentication is used, the user name that was used for login is

automatically selected

Only the file name and location of a file stored in the Quick File folder can be

changed as required.

To delete all files in the Quick File folder with the exception of
protected files:

In "Setting mode", select [System Settings] → [Document Filing Settings] → [Delete
All Quick Files]. Configure settings to have all files deleted when the power is

turned on as required.

«
...
865
866
867
868
869
...
»

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments