Sharp MX-2610N User Manual Download Page 737

Page: 737 / 1312

OPERATION GUIDE - RESENDING TO UNSUCCESSFUL BROADCAST TRANSMISSION DESTINATIONS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-034b.htm[24/03/2011 3:01:41 PM]

Index

Contents

Overview

action panel to resend the
image.

The steps to follow after the [Resending to all unsuccessful transmission

destinations] key is tapped differ depending on whether or not document filing is

used.

Using document filing:

You will return to the document filing resend screen with the unsuccessful

destinations entered.

Perform the document filing resend procedure. (There is no need to re-scan the

original.)

Not using document filing:

You will return to the base screen with the unsuccessful destinations entered.

Place the original and perform the steps of the broadcast transmission.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 737 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: