Sharp MX-2610N User Manual Download Page 164

Page: 164 / 1312

OPERATION GUIDE - USING THE AUTOMATIC DOCUMENT FEEDER FOR COPYING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-006.htm[24/03/2011 2:57:11 PM]

MX-2610N / MX-3110N / MX-3610N

USING THE AUTOMATIC DOCUMENT FEEDER FOR COPYING

Index

Contents

COPYING

steps in all >

Check the paper to be used

and the colour mode.

Make sure that the desired paper (tray)

and colour mode are selected.

To change the paper (tray), tap the

[Paper Select] key.

SELECTING THE PAPER TRAY

FOR COPYING

To change the colour mode, tap the

[Colour Mode] key.

COPY COLOUR MODES

Place the original in the document feeder tray of the

automatic document feeder, and tap the [Preview] key.

AUTOMATIC DOCUMENT FEEDER

Depending on the size of the placed original, there may be cases where the same

size of paper as the original is not selected automatically. In this event, change the

paper size manually.

Tap the [Colour Start] or [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of

copies.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 164 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: