Sharp MX-2610N User Manual Download Page 887

Page: 887 / 1312

OPERATION GUIDE - FILE MOVING

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/06-026b.htm[24/03/2011 3:03:00 PM]

MX-2610N / MX-3110N / MX-3610N

FILE MOVING

Index

Contents

Overview

DOCUMENT FILING

steps in all >

Tap the [Move] key on the

action panel.

Tap the key of the folder to

which you want to move
the file.

If the folder with a password is tapped, a

password entry screen will appear.

Enter the password (5 to 8 digits) using

the numeric keys and tap the [OK] key.

After selecting the desired file, follow the steps below.

SELECTING A FILE TO RETRIEVE

Tap the [Move to:] key.

A file cannot be moved to the Quick File folder. With this procedure, the

original name is changed and the file is moved to the specified folder. (Unlike

the "Save As" command on a computer, the file is not copied to the specified

folder with the original file remaining in the original location.)

To change the file name, tap the [File Name] key.

Tap the [Move] key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 887 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: