Sharp MX-2610N User Manual Download Page 107

Page: 107 / 1312

OPERATION GUIDE - CHANGING MODES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-056.htm[24/03/2011 2:56:44 PM]

MX-2610N / MX-3110N / MX-3610N

CHANGING MODES

Index

Contents

OPERATIONS COMMON TO ALL MODES

Changing mode from the Home screen

[Home Screen] button

Tap the mode icon.

Operate for each mode.

Changing mode from the mode display

Tap on the mode display.

Tap for any mode desired.

Operate for each mode.

In image send mode, tap

to change mode.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 107 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: