Sharp MX-2610N User Manual Download Page 318

Page: 318 / 1312

OPERATION GUIDE - REPEATING THE SAME IMAGE ON ONE SHEET

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-063a.htm[24/03/2011 2:58:13 PM]

MX-2610N / MX-3110N / MX-3610N

REPEATING THE SAME IMAGE ON ONE

SHEET

Repeat layout

Index

Contents

Operation

COPYING

This function copies multiple same original

images on one sheet. You can set any of

the following three (3) types of repeat copy.

Repeat
method

Description

Auto

The maximum repeat count to copy images on a sheet is calculated

automatically according to the original size, paper size, and copy ratio being

selected from the base screen.

Fixed Repeat

When you select a repeat count, original size, and paper size to copy

images on a sheet, the copy ratio is calculated automatically and the original

is copied.

Photo Repeat

This function repeatedly copies on A4 (8-1/2" x 11") or A3 (11" x 17") papers

without changing the copy ratio of the photo size original. You can select

any of the following five types of original size:

Original sizes up to 130 mm x 90 mm (3" x 5")

Original sizes up to 70 mm x 100 mm (2-1/2" x 4")

Original sizes up to 57 mm x 100 mm (2-1/8" x 3-5/8")

Original sizes up to 100 mm x 150 mm (5" x 7")

Original sizes up to 65 mm x 70mm (2-1/2" x 2-1/2")

Repeat Layout must be specified before scanning the original.

If the copy ratio automatically obtained in [Fixed Repeat] exceeds 25 to 400%, it will

result in an error. Select the number of faces to repeat again.

Always place an original on the document glass for photo repeating.

This function cannot be combined with Mixed Size Original or 2-Sided Copy.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 318 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: