Sharp MX-2610N User Manual Download Page 1011

Page: 1011 / 1312

OPERATION GUIDE - TRAY SETTINGS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-026-01.htm[24/03/2011 3:03:53 PM]

MX-2610N / MX-3110N / MX-3610N

TRAY SETTINGS

SETTING MODE

Paper tray and paper type settings are explained in this section.

These settings specify the paper type, paper size, and functions allowed for each paper tray.

When the [Tray Settings] key is tapped, a list appears showing the trays and the current

settings.

Auto Tray Switching

When a tray runs out of paper during printing, this determines whether or not another tray with

the same size and type of paper is automatically selected and printing continues.

Settings of each tray

When the [Change] key is tapped, the corresponding setting screen appears.

The following settings can be configured.

Item

Description

Type

Select a type of paper to be loaded into the

tray.

The paper types that can be selected vary by

paper tray. For more information, see "Tray

Settings".

To user type setup, see "PAPER TYPE

REGISTRATION".

Size

Select the paper size from the list. The paper

sizes that can be selected vary by tray. The

sizes that can be selected may also be

restricted by the paper type selected above.

For more information, see "Tray Settings".

If the desired size does not appear in the list,

select [Custom Size] and directly enter the

size (only for the bypass tray). For more

information, see "Tray Settings".

Feeding Approved Job

Select the modes that can be used. If there is

a function that you do not wish to be used

with the selected tray, disable the function.

When the "Type" is other than plain paper,

recycled paper, coloured paper, or a user

type, [Fax] and [Internet Fax] cannot be

selected.

«
...
1009
1010
1011
1012
1013
...
»

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 1011 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: