Sharp MX-2610N User Manual Download Page 309

Page: 309 / 1312

OPERATION GUIDE - SCANNING THIN ORIGINALS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-060b.htm[24/03/2011 2:58:09 PM]

MX-2610N / MX-3110N / MX-3610N

SCANNING THIN ORIGINALS

Slow scan mode

Index

Contents

Overview

COPYING

steps in all >

Touch the [Others>>] key, and tap the [Slow Scan Mode] key.

A checkmark appears on the icon.

After the settings are completed, tap the [<< Back] key.

To cancel slow scan mode:

Tap the [Slow Scan Mode] key to clear the checkmark.

Place the original in the document feeder tray of the

automatic document feeder, and tap the [Preview] key.

AUTOMATIC DOCUMENT FEEDER

If the originals are inserted with too much force, they may crumple and misfeed.

Tap the [Colour Start] or [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of

copies.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 309 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: