Sharp MX-2610N, User Manual, Page: 1126 / 1312

OPERATION GUIDE - E-MAIL PRINT SETTINGS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-055.htm[24/03/2011 3:04:31 PM]
MX-2610N / MX-3110N / MX-3610N
E-MAIL PRINT SETTINGS
Index Contents
SETTING MODE
When an e-mail is sent to the address of this machine, a file attached to this mail is printed
out.
Item Description
E-mail Print Select this option to use the E-mail printing.
POP3 Server
Enter the IP address or host name of the
POP3 server.
Port Number
Enter the port number of the POP3 server.
The default setting is port 110.
POP Authentication
The authentication protocol (including APOP)
is used for authentication to the POP3 server.
User Name
Enter the user name. The special user
account is required for e-mail printing.
Password
Enter the password. To change the password,
select [Change Password] and enter the
new password in the text box.
Check Interval
Enter the polling interval for the POP3 server.
The default setting is five minutes.
Enable SSL
If set to , the POP over SSL
communication or the POP over TLS
communication by STLS command is
enabled. This requires the server to support
the POP over SSL communication or the
STLS command.
To allow the POP over SSL communication,
set the "Port Number" to the POP over SSL
communication port number.
To allow POP over TLS communication, set
the "Port Number" to the same port number
as for the normal POP3 communication.
Connection Test
Tap the [Execute] button to test the
connection to the POP3 server.