Sharp MX-2610N User Manual Download Page 301

Page: 301 / 1312

OPERATION GUIDE - MAKING A PROOF COPY

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-057b.htm[24/03/2011 2:58:06 PM]

Index

Contents

Overview

Tap the [Colour Start] or [B/W Start] key.

Make only one set of copies.

Check the copy result. If no problem is found, tap the [End]

key.

As necessary, change the settings and repeat proof copying until you are satisfied with

the copy result.

You can also change the number of copies. To change the number of copies, use

the numeric keys.

In Proof Copy, unavailable function keys are not displayed.

Some available functions may be restricted.

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

To cancel all settings:

Tap the [CA] key.

Tap the [Colour Start] or [B/W Start] key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 301 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: