Sharp MX-2610N User Manual Download Page 664

Page: 664 / 1312

OPERATION GUIDE - POLLING RECEPTION USING F-CODES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-091b.htm[24/03/2011 3:01:03 PM]

MX-2610N / MX-3110N / MX-3610N

POLLING RECEPTION USING F-CODES

FAX

steps in all >

Tap the [Others >>] key, and tap the [Polling] key.

A checkmark appears on the icon.

After the settings are completed, tap the [<< Back] key.

To cancel the Polling setting:

Tap the [Polling] key to clear the checkmark.

Specify the destination.

ENTERING DESTINATIONS

If the sub-address and passcode are stored in the one-touch key, the following

sub-steps are not necessary. Go to step 8.

Tap the [Sub Address] key.

Enter "/".

Enter the sub-address using the numeric keys.

Tap the [Sub Address] key.

Enter "/".

If a passcode has been omitted in the memory box of the destination machine, it is

not necessary to take step 7.

Enter the passcode using the numeric keys.

Tap the [Start] key.

Your machine will call the other machine and initiate reception of the fax.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 664 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: