Sharp MX-2610N User Manual Download Page 223

Page: 223 / 1312

OPERATION GUIDE - COLLECTIVELY SCANNING A LARGE NUMBER OF ORIGINALS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-028b.htm[24/03/2011 2:57:36 PM]

MX-2610N / MX-3110N / MX-3610N

COLLECTIVELY SCANNING A LARGE

NUMBER OF ORIGINALS

Job build

COPYING

Place the original in the

document feeder tray of
the automatic document
feeder, and tap the
[Preview] key to scan the
first original.

Insert the originals all the way into the

document feeder tray. Originals can be

stacked up to the indicator line.

AUTOMATIC DOCUMENT FEEDER

Copying in job build mode

Changing the copy settings for each set of originals

Copying in job build mode

<6 steps in all >

Tap the [Others>>] key, and tap the [Job Build] key.

A checkmark appears on the icon.

To cancel the job build mode

Tap the [Off] key to uncheck it.

After the settings are completed, tap the [<< Back] key.

Change copy settings as required.

Set a colour mode and others. When changing copy settings, tap the [Change the

settings of the original to be scanned next] key. For more information, see

"Changing the copy settings for each set of originals".

When scanning the next original without changing any settings, go to step 5.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 223 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: