Sharp MX-2610N User Manual Download Page 707

Page: 707 / 1312

OPERATION GUIDE - USING A SEARCH NUMBER TO RETRIEVE A DESTINATION

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-022.htm[24/03/2011 3:01:25 PM]

MX-2610N / MX-3110N / MX-3610N

USING A SEARCH NUMBER TO RETRIEVE A DESTINATION

Index

Contents

IMAGE SEND

step in all >

Enter a search number (4

digits) using the numeric
keys and tap the [OK] key.

When the search number is entered, the

stored address is retrieved and specified

as a destination.

If an incorrect search
number is entered:

Tap the [C] key to clear the

number and enter the correct

number.

Tap the [Call Search Number] key.

The search number is programmed when the destination is stored in the address

book.

If you do not know the search number, tap the [Print Individual List] key on the

action panel to print and check the address list.

When entering search numbers such as "0001" and "0011", "0" can be omitted.

For example to enter "0001", enter "1" and tap the [OK] key.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 707 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: