Sharp MX-2610N User Manual Download Page 624

Page: 624 / 1312

OPERATION GUIDE - SENDING ORIGINALS OF DIFFERENT SIZES

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-070b.htm[24/03/2011 3:00:42 PM]

MX-2610N / MX-3110N / MX-3610N

SENDING ORIGINALS OF DIFFERENT

SIZES

Mixed size original

Index

Contents

Overview

FAX

steps in all >

Place originals in the

automatic document
feeder.

Insert the originals with the corners

aligned together in the far left corner of

the document feeder tray.

AUTOMATIC DOCUMENT FEEDER

Enter the destination fax number.

ENTERING DESTINATIONS

Tap the [Mixed Size Original] key.

For mixed size originals, set "Original" to "Auto".

A checkmark appears on the icon.

To cancel the Mixed Size Original setting:

Tap the [Mixed Size Original] key to clear the checkmark.

Tap the [Start] key to start scanning of the original.

Tap the [Preview] key to check the preview of an image before sending a fax. For

more information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However,

settings for this function cannot be changed in the preview screen.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 624 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: