Sharp MX-2610N User Manual Download Page 1082

Page: 1082 / 1312

OPERATION GUIDE - DATA BACKUP

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-043.htm[24/03/2011 3:04:14 PM]

MX-2610N / MX-3110N / MX-3610N

DATA BACKUP

SETTING MODE

The system storage and settings contained in the machine can be saved in a USB memory

device.

Storage Backup

Address book information and user information stored in the machine can be saved to and

retrieved from a USB memory device.

Export

Exports data to a USB memory device.

Import

Imports data, that you have saved in the USB memory device by "Export" option, into the

machine.

Device Cloning

Saves the machine setting information in XML format and copies the information to another

machine.

This function saves you the trouble of repeatedly configuring the same settings in multiple

machines.

Export

Exports data to a USB memory device.

Import

Imports data, that you have saved in the USB memory device by "Export" option, into the

machine.

You can export data only to MX-2610N/MX-3110N/MX-3610N.

The following data is not copied when device cloning is performed:

List print and fax forwarding items.

Count and device status display items.

IP address of the machine, device name, administrator password, sender

names for image send, and other information that is specific to the machine.

The settings specific to each hardware such as screen contrast, colour

adjustment, and saddle stitch position adjustment

Forward Address Book

«
...
1080
1081
1082
1083
1084
...
»

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 1082 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: