Sharp MX-2610N User Manual Download Page 772

Page: 772 / 1312

OPERATION GUIDE - ERASING PERIPHERAL SHADOWS ON THE IMAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-050b.htm[24/03/2011 3:01:59 PM]

Index

Contents

Overview

Specify the erase width.

Tap the numeric value display indicating the margin shift area on the front side

or reverse side, and enter the area using the numeric keys.

To quickly set the area, first specify a value close to the desired value by the

numeric keys, then adjust it with

After the settings are completed, tap

To cancel the erase settings:

Tap the [Clear] key.

Tap the [Start] key to start scanning of the original.

Tap the [Preview] key to check the preview of an image before sending a fax. For

more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".

If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning and transmission have ended.

If you placed the original on the document glass, scan each page one at a time.

When scanning finishes, place the next original and tap the [Start] key.

Repeat until all pages have been scanned and then tap the [Read-End] key.

A beep will sound to indicate that transmission has ended.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 772 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: