Sharp MX-2610N User Manual Download Page 1197

Page: 1197 / 1312

OPERATION GUIDE - PRINTING DOES NOT TAKE PLACE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/08-007-01.htm[24/03/2011 3:04:58 PM]

MX-2610N / MX-3110N / MX-3610N

PRINTING DOES NOT TAKE PLACE

TROUBLESHOOTING

If you are unable to solve a problem using the solutions in this manual, press the [Power]

button and then turn the main power switch to the "

"position. Wait at least 10 seconds and

then turn the main power switch to the "

"position. After the main power indicator colour

changes from orange to green, press the [POWER] button.

When the background colour of the job status display at the upper right corner of

the touch panel is not grey, do not switch off the main power switch or unplug the

power plug. This may damage the hard drive or cause the data being stored or

received to be lost.

Point to check

Solution

Is your PC connected correctly to the

machine?

Make sure that the cable is
connected securely to the LAN
connector or the USB port of your PC
and that of the machine.

If you are connected to a network, make sure

that the LAN cable is securely connected to

the hub as well.

- "SIDE AND BACK" in OPERATIONS

COMMON TO ALL MODES

Is the machine connected to the same

network (LAN, etc.) as your PC?

The machine must be connected to
the same network as your PC.

If you do not know which network the

machine is connected to, ask the network

administrator.

Is the IP address selected correctly?

(Windows)

Check the IP address setting.

If the machine does not have a permanent IP

address (the machine receives an IP address

from a DHCP server), printing will not be

possible if the IP address changes.

Print the "All Custom Setting List" in the

setting mode and check the IP address of the

machine. If the IP address has changed,

change the port setting for the printer driver.
"Setting mode" → [List Print (User)] → [All
Custom Setting List]

See: Software Setup Guide

If the IP address changes frequently, it is
recommended that a permanent IP address

«
...
1195
1196
1197
1198
1199
...
»

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 1197 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: