Sharp MX-2610N User Manual Download Page 714

Page: 714 / 1312

OPERATION GUIDE - USING A TRANSMISSION LOG TO RESEND

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/05-027a.htm[24/03/2011 3:01:29 PM]

MX-2610N / MX-3110N / MX-3610N

USING A TRANSMISSION LOG TO RESEND

Index

Contents

Operation

IMAGE SEND

Select a destination from a transmission log and resend the data.

The destinations of the most recent 50 transmissions by Scan to E-mail, Internet fax (including

Direct SMTP addresses), and/or fax are stored. Select one of these to resend to that

destination. The destinations of the FTP/Desktop transmission and Scan to Network Folder are

also shown in the transmission log.

The addresses shown in the transmission log can also be stored in an address book. This is

convenient when storing an address that was manually entered. However, addresses of the

FTP/Desktop transmission cannot be stored from the machine.

When a destination for retransmission is selected in the transmission log screen,

the mode of the selected destination is automatically selected.

The following types of addresses are not stored for resending.

One-touch key for a contact or group in which multiple destinations are stored.

Broadcasting destinations

Destinations transmitted to using a program

The user name and password are not stored for security reasons. If a screen

requiring you to enter such information appears, enter the information again.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 714 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: