Sharp MX-2610N User Manual Download Page 602

Page: 602 / 1312

OPERATION GUIDE - ERASING PERIPHERAL SHADOWS ON THE IMAGE

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/04-063b.htm[24/03/2011 3:00:32 PM]

MX-2610N / MX-3110N / MX-3610N

ERASING PERIPHERAL SHADOWS ON THE

IMAGE

Erase

FAX

steps in all >

Tap the checkbox of the

edge that you wish to
erase, and specify the
erase position.

Check that he tapped checkbox is set to

. If the [Specify Frame] key is tapped,

the [Up], [Down], [Left], and [Right]

checkboxes are set to

. If the [Specify

Frame+Centre] key is tapped, all the

checkboxes are set to

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Enter the destination fax number.

ENTERING DESTINATIONS

Tap the [Others >>] key, and tap the [Erase] key.

Specify the erase edge on the reverse side when erasing edges of one to three sides

of Up, Down, Left, and Right on the front side to scan a 2-sided original.

If the [Reverse erase position of back face.] checkbox is set to

, the edge in the

position opposite to the erased edge on the front side will be erased.

If the [Reverse erase position of back face.] checkbox is set to

, the edge in the

same position as on the front side will be erased.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 602 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: