Sharp MX-2610N User Manual Download Page 334

Page: 334 / 1312

OPERATION GUIDE - INTERRUPT COPY

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/02-067b.htm[24/03/2011 2:58:19 PM]

MX-2610N / MX-3110N / MX-3610N

INTERRUPT COPY

Index

Contents

Overview

COPYING

steps in all >

Tap the [Interrupt] key.

The interrupt mode screen appears.

If user authentication is enabled

tap the [Interrupt] key to display

the user authentication screen.

Enter the user name and

password to perform user

authentication.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the

document glass.

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS

Configure copy settings.

To cancel interrupt copy, tap the [Cancel] key.

Tap the [Colour Start] or [B/W Start] key to start interrupt

copying.

When the interrupt copy job is completed, the interrupted job resumes.

The interrupt copy function does not display the preview of the scanned original.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 334 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: