Sharp MX-2610N User Manual Download Page 448

Page: 448 / 1312

OPERATION GUIDE - PRINTING TEXT ON TABS OF TAB PAPER

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/03-038a.htm[24/03/2011 2:59:14 PM]

MX-2610N / MX-3110N / MX-3610N

PRINTING TEXT ON TABS OF TAB PAPER

Tab paper settings/tab

paper print

Index

Contents

Operation

PRINTER

Tab Paper Settings

Create the text to be printed on tab paper in

an application, and set the distance of

shifting the text in [Tab Paper Settings] on

the [Advanced] tab of the printer driver

property window. The text is printed on the

tabs.

Tab sheets are printed while they are

inserted between the desired pages.

In [Tab Paper Print] on the [Special Modes]

tab of the printer driver properties window,

enter the text that you wish to print on the

tabs. Specify the detailed settings such as

the size of the tabs, the starting position, the

distance between tabs, and the page

numbers where tab sheets will be inserted.

There are two methods of printing on the tabs of tab paper: "Tab Paper Settings" and "Tab

Paper Print".

Tab Paper Print (for PCL6 only)

These functions are available in a Windows environment.

Tab paper must be loaded into the bypass tray.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 448 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: