OPERATION GUIDE - INTERNET FAX SETTINGS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-037-03.htm[24/03/2011 3:04:09 PM]
Set Address for Data Forwarding
When the machine cannot print a received fax, the fax can be forwarded to another machine.
This setting is used to configure the address of the other machine.
Forwarding to
Enter the forwarding address (maximum of 64 characters).
Direct SMTP
Select this to enable forwarding when direct SMTP is used.
Add Hostname or IP Address Too
Select this to separately enter a host name or IP address.
Hostname or IP Address
Use this setting when "Add Hostname or IP Address." is enabled. Enter the host name or IP
address (maximum of 64 characters).
Multiple forwarding addresses cannot be stored.
Letter Size RX Reduce Print
This program is not available in Canada and Philippines. When a letter (8-1/2" x 11") size fax is
received, this setting reduces the fax to A4 size.
When this setting is enabled, A4 size faxes are also reduced.
Receiving Date & Time Print
Enable this setting to have the date and time of reception printed.
Select [Inside the Received Image] or [Outside the Received Image] for the position where the
date and time is printed.
When [Inside the Received Image] is selected, the date and time of reception is printed on the
received image.
When [Outside the Received Image] is selected, the received image is reduced and the date
and time of reception is printed in the blank area that results.
The [Outside the Received Image] cannot be selected for the reception date and
time print setting if "Auto Receive Reduce Setting" is not enabled.
A3 RX Reduce
This function is not available in some countries and regions.
When an A3 size fax is received, this function reduces the fax to ledger (11" x 17") size.
When this setting is enabled, ledger (11" x 17") size faxes are also reduced.
POP3 Communication Timeout Setting
The duration of time the machine waits until stopping reception can be set from 30 to 300