Sharp MX-2610N User Manual Download Page 962

Page: 962 / 1312

OPERATION GUIDE - NETWORK STATUS

file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/07-007.htm[24/03/2011 3:03:30 PM]

MX-2610N / MX-3110N / MX-3610N

NETWORK STATUS

SETTING MODE

The Network Status screen shows the general status information and the statuses relevant to,

TCP/IP, NetWare, EtherTalk, and NetBEUI protocols.

Item

Description

General

Displays the information common to the

network.

Link Status:

Displays the data transfer

rate of the NIC and cable information.

Duplex Mode:

Displays the duplex

mode of the NIC.

Hardware Address:

Displays the

MAC address of the NIC.

Print Status on Startup:

Displays

whether or not status is printed upon

startup.

Device Name:

Displays the device

name.

Domain:

Displays the domain name.

TCP/IP

Displays the current status of the TCP/IP

protocol.

IPv4 Settings:

Displays the IPv4

protocol settings.

DHCP/BOOTP:

Selects whether or

not the IP address is obtained from

the DHCP/BOOTP server.

RARP:

Displays the status of the

RARP protocol.

IPv4 Address:

Displays the IPv4

address.

Subnet Mask:

Displays the

current subnet mask.

Default Gateway:

Displays the

current default gateway.

IPv6 Settings:

Displays the IPv6

status.

DHCPv6:

Displays the status of

the DHCPv6 server.

Summary of Contents for MX-2610N

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2610N

Reviews:

Sharp MX-2610N, User Manual, Page: 962 / 1312

Search results

Summary of Contents for MX-2610N

Reviews: